TRANSCEIVERS SOLD SEPARATELY OR G.F.E.

Integrated 3 Transceivers Dual 152 50W Power Supply Case ABP-ITPC-CV22-2S

Name: Integrated 3 Transceivers Dual 152 50W Power Supply Case
SKU: ABP-ITPC-CV22-2S
Availability: InStock

The ABP-ITPC-CV22 / ABP-ITPC-CV22-2S Integrated 3 Transceivers Power Supply Case (ITPC) is a complete uninterruptible power, voice and data system in a small watertight transportable case.

This rapid deployment, portable, Enroute communication Case accommodates the DC power and voice requirement of 2 AN/PRC-152 Radios and 1 AN/PRC-117G (V)1(C) or RF-7800M-MP transceivers with triple 50 Watts 30-512MHz Multi-Band, FH amplification. The transceivers are securely mounted on a Jerk-And-Run mount inside the case.
The ITPC saves many BA 5590/U batteries and will pay for itself after only one month of operation by eliminating extensive and expensive battery replacement while conserving batteries for critical missions. The ITPC system contains high efficiency AC and DC power supplies, 1 rechargeable backup battery, charger and control circuits that allow the user to operate the transceivers from any AC power source worldwide (85 270 VAC / 47 440 Hz including AC generator, local power grid and aircraft power) or 9 36V DC power source to include HMMWV, military vehicle, 12V commercial vehicle, boat and aircraft.

The power units supply uninterruptible power to the transceivers while charging the one 26.V/2.4AH internal rechargeable, removable backup battery that automatically powers the AN/PRC-117G transceiver during an AC or DC power failure. Operating status of the unit is provided to the user via three Night Vision Goggles (NVG) compatible test indicator lights and a TTL logic output. A 26.5VDC nominal / 1A auxiliary power is available to power an external device or Amplified Speaker. Full protection is provided by the unit against EMI & RFI noise, voltage surge, reverse polarity, over-voltage, over temperature and short circuit.

The ABP-ITPC-CV-22 includes 3 High Efficiency ABP-HEAS-1 Amplified Speakers (CV-22-2S includes two speakers) which can be used for local or remote operation of up to 3 transceivers. Standard military handset/headset, H-250/U or similar type (G.F.E.) can be connected to the Amplified Speaker. A special Automatic Level Control (ALC) circuit at the audio inputs insures constant audio level at the speaker regardless to the level of the received audio from the transceiver/encryption unit. A 5 Watts of clear, crisp audio overcomes noisy environment and provides the user with consistent audio clarity.

The ITPC is a robust, water/air tight and sand/dust proof case. Operating temperature range is ‑40⁰C to +70⁰C. Storage temperature range is ‑45⁰C to +85⁰ C.

ABP ITPC-CV22 / ABP ITPC-CV22-2S – Including Uninterruptible Power Supply, one 26.5V/2.4AH Rechargeable Battery, AC and DC Cables and one Operation/Maintenance manual.
ABP-ITPC-CV22 – Includes 3 ABP-HEAS-1 amplified speakers with power and audio cables.
ABP-ITPC-CV22-2S – Includes 2 ABP-HEAS-1 amplified speakers with power and audio cables.

SKU: ABP-ITPC-CV22-2S Categories: Integrated SATCOM, Multi-Band and HF Cases, Integrated Transceivers Cases (Mini TOC) Tags: AN/PRC-117G, AN/PRC-148, AN/PRC-152, AN/PRC-163, JEM, MBITR, RF-335M-STC, RF-7800M-MP, RF-7800V-HH

Features

Worldwide input power (including aircraft power): 85-270 VAC / 47-440 Hz or 9-36 VDC (Not limited to 18VDC).

Uninterruptible power for four transceivers.

ZERO WAIT SWITCHING™: Instantaneous automatic switchover between external AC and DC power sources.

Transceiver operation from 1 rechargeable backup battery (included) during AC or DC power failure.

1 Removable and replaceable internal battery. More battery capacity than BB 490/U battery at 1/2 the size!

Automatic battery charging while operating the transceiver and speaker from AC or DC power source.

Self-contained ready for operation! No need to remove components from case. No setup time is required!

Space age robust composite case with wheels, retractable handle, removable lids, quick lock latches and internal gasket. Water/air tight and sand/dust proof.

Transceivers are mounted on Jerk-And-Run mounts.

3 Auxiliary 26.5VDC/1A outputs for speaker and external equipment.

Complete separation between AC and DC cables and connectors for operator safety.

2 or 3 High Efficiency Amplified Speakers P/N ABP-HEAS-1 for local or remote operation of up to 3 transceivers up to 1,000 feet away. Speaker audio and power cables included.

Small size: 22.1”L x 17.9”W x 10.4”H.

Weighs 45 lbs w/power supplies. Without Transceivers.

Operating temperature: -40⁰ to +70⁰

Includes 2 AC and 2 DC power cables.

Storage space for G.F.E. Transceiver, power supply and all cables.

Applications

Integrated, self-contained power/voice/data case with 50 Watts 30-512MHz Multi-Band, FH amplification for 2 AN/PRC-152 Radios and 1 AN/PRC-117G(V)1(C) or RF-7800M-MP series transceivers in vehicle convoy, Command Post, TOC, shelter, HMMWV, military & civilian vehicles, aircraft, shipboard and portable Grab & Go missions.

Uninterruptible transceiver and amplifier operation from almost any AC or DC power source worldwide. No need to remove components from case.

Powers 3 transceivers during Fly Away/training/exercise.

Conserves batteries for critical missions.

Specifications

Weight

45 lbs

Dimensions

22.1 × 17.9 × 10.4 in

Radio Quantity

AC Input Voltage (VAC)

85-270

DC Input Voltage (VDC)

9-36

Frequency Band

UHF SATCOM, VHF LOS

Battery Back-Up for Radio

Yes

Direct Connect to Radio

Yes

Multiple Outputs

Yes

Speakers Included

Yes

Amplified

Yes

Case Style

ISC / ITPC

Dual Band

Yes

SATCOM LNA

Yes

Transceiver

AN/PRC-117G, AN/PRC-148, AN/PRC-152, AN/PRC-163, JEM, MBITR, RF-335M-STC, RF-7800M-MP, RF-7800V-HH

Operating Temperature

-40°C to +70°C

Storage Temperature

-45°C to +85°C

Part number: ABP‑ITPC-CV22 or ABP-ITPC-CV-22-2S

Input power: Worldwide 85-270VAC / 47-440Hz or 9-36VDC.

4 Outputs: 2 outputs provide 26.5VDC nominal / 5.25A, 7A peak and 2 outputs provide 12VDC/24VDC for PRC-152.

Output Noise and Ripple: 15mVPP typ.

Output Status: Night Vision Goggles (NVG) compatible test lights and TTL logic.

Outputs Protection: Continuous short circuit, current limiting, Over-Voltage and Over-Temperature protection.

Conversion Efficiency: Up to 98% for DC & AC inputs.

Backup Power: ZERO WAIT SWITCHING^TM Instantaneous automatic switch-over to a rechargeable backup battery during an AC or DC power failure.

Internal Batteries:5V/2.4AH removable and replaceable battery (1/3 the size of BA-5590/BB-2590 battery)

Battery Charging: Automatic charging from AC or DC power sources while operating the transceiver. A BATTERY STATUS light indicates charging, capacity, condition and fully charged battery. Charge time is 2 hours typical.

3 Auxiliary Outputs: Each output provides 26VDC/1A nominal for amplified speaker / external encryption equipment.

Operator Safety: Complete separation between AC and DC cables and connectors for operator safety.

2 or 3 HEAS-1 High Efficiency Amplified Speakers with Output: 5 Watts

2 or 3 HEAS-1 High Efficiency Amplified Speakers with Automatic Level Control: Provides constant audio level at the speaker regardless to the level of the received audio from up to 6 transceivers / encryption equipment.

2 or 3 ABP-HEAS-1 High Efficiency Amplified Speaker Interface: Up to 2 H-250/U Handset or similar.

Operating Temperature Range: -40 to +70⁰C (Military grade)

Storage Temperature Range: -45 to +85⁰C

Size: 1”L x 17.9”W x 10.4”H.

Weight: Weighs 45 lbs (With power supplies. Without Transceivers)

Environmental Protection: Space age robust composite case with wheels, retractable handle, quick lock latches and internal gasket. Water/air tight and sand/dust‑proof. Removable lid is optional.

Warranty: 3 years.