array(3) {
[0]=>
array(2) {
[0]=>
string(4) "Home"
[1]=>
string(15) "https://abp.com"
}
[1]=>
array(2) {
[0]=>
string(39) "Handheld Radio Products and Accessories"
[1]=>
string(73) "https://abp.com/product-category/handheld-radio-products-and-accessories/"
}
[2]=>
array(2) {
[0]=>
string(109) "20 Watt Amplifier Kit 30 MHz – 512 MHz, Multi-Band Automatic Band-Switching with LOS and SATCOM Antenna"
[1]=>
string(170) "https://abp.com/products/satcom-and-multi-band-power-amplifier-kits/20-watt-amplifier-kits-30-mhz-512-mhz-multi-band-automatic-band-switching-with-los-and-satcom-antenna/"
}
}
array(3) {
[0]=>
array(2) {
[0]=>
string(4) "Home"
[1]=>
string(15) "https://abp.com"
}
[1]=>
array(2) {
[0]=>
string(39) "Handheld Radio Products and Accessories"
[1]=>
string(73) "https://abp.com/product-category/handheld-radio-products-and-accessories/"
}
[2]=>
array(2) {
[0]=>
string(109) "20 Watt Amplifier Kit 30 MHz – 512 MHz, Multi-Band Automatic Band-Switching with LOS and SATCOM Antenna"
[1]=>
string(170) "https://abp.com/products/satcom-and-multi-band-power-amplifier-kits/20-watt-amplifier-kits-30-mhz-512-mhz-multi-band-automatic-band-switching-with-los-and-satcom-antenna/"
}
}
20 Watt Amplifier Kit 30 MHz – 512 MHz, Multi-Band Automatic Band-Switching with LOS and SATCOM Antenna ABP-10PA35-KT2
Part number: ABP-10PA35-KT2
The ABP-10PA35-KIT(s) are a portable, lightweight, waterproof, fully automatic band-switching RF amplifier kit(s) for multi-band VHF/UHF Tactical Radio equipment employing legacy, proprietary and emerging waveforms. The amplifier covers the frequency band of 30-512 MHz using six high speed auto switching filters to assure harmonic suppression and is SINCGARS, HAVE QUICK, and ECCM compatible. The amplifier includes Voltage Spike Suppression, RF sensing, T/R switching, Automatic Level Control (ALC), six automatically switched harmonic filter bands (DAMA capable), and protection against antenna mismatch and over-temperature. The unit may be powered from a single XX90 or similar batteries; or 12 and 24 VDC vehicle power. Protection against accidental polarity reversal is also provided. Low current on standby due to “sleep mode” greatly extends battery life in field use. The amplifier comprises a rugged submersible 3-piece aluminum case.
Features
- Radio Vendor independent. Interoperable with AN/PRC-148, AN/PRC-152 and other radios. Single and multi-band radio compatible with just an RF connection.
- Operates across the entire 30-512 MHz band without having to purchase or carry a second antenna.
- Low RF input power for full 20 W CW output.
- Super low “sleep mode” standby RX power drain.
- Single battery operation: A single 5590 battery will provide approximately 17 hrs of operation with a 15% duty cycle and approximately 25 hrs of operation for the newer 5390 battery.
- High speed filter switching in SINCGARS, HAVE QUICK, and ECCM modes to assure interference free operation.
- DAMA capable.
- Battery and Vehicle power compatible, 12 and 24 volt systems. Filtered and DC transient protected.
- Waterproof (Submersible).
- 3 year Warranty
Applications
- 20 Watts, 30-512 MHz RF Booster Amplifier
- Battery Cable (22” cable connecting one XX90 or similar batteries)
- Radio Cable (36” TNC Male to TNC Male)
- Antenna Cable (36” TNC Male to TNC Female)
- Tactical Vest Pouch (Attaches to any MOLLIE/PALS style gear for holding the amplifier)
- Tactical Antenna Holder (Attaches to any MOLLIE/PALS style gear for holding the antenna)
- Blade Antenna 30-512 MHz (TNC Male)
- RamHead Tactical SATCOM Antenna and RF Cables
- SATCOM Switch Holder (Attaches to any MOLLIE/PALS style gear for holding the SATCOM switch)
- RF Switch Kit – LOS/SATCOM w/TNC adapter
Specifications
| GENERAL SPECIFICATIONS | |
|---|
| FREQUENCY RANGE | 30-512 MHz |
| POWER OUTPUT | 20 Watts CW or PEP AM Modulation 1 kHz DOM 70%; <10% AM distortion nominal |
| INPUT POWER RANGE | Nominal 2W CW or PEP for full 20W output. Up to 8W without damage |
| RF KEYING SENSITIVITY | <1 Watt CW typical |
| T/R SWITCHOVER TIME | <25 μS |
| MODULATION | All Legacy and Modern complex tactical communications waveforms like ANW2, WNW, and SRW |
| DUTY CYCLE | Tactical operations. 100% for networking modulations |
| INPUT/OUTPUT IMPEDANCE | 50 Ohm nominal |
| INPUT VSWR | 1.5:1 nominal |
| HARMONICS | Better than -60 dBc typical |
| SPURIOUS OUTPUTS | Better than -70 dBc |
| POWER REQUIREMENT | 12 to 35.5 VDC single XX90 battery, 12 and 28Vdc vehicles |
| CURRENT | 3.2A Amps @ 24V typical |
| OPERATING TEMPERATURE | -30 to +60 ºC Ambient |
| ALTITUDE (operating) | 15,000 ft |
| IMMERSION | (water) IP67 |
| VIBRATION / SHOCK /
HUMIDITY / ENVIRO
| Designed to meet applicable sections of Mil Std 810F/designed for ground/base vehicle use |
| SIZE (HxWxD) | 1.58 x 3.75 x 5.05 inches |
